JK: Dana 30/44 フロント アクスル 8-ラグ ロック ハブ コンバージョン キット w/ ベント ビッグ ローター
JK: Dana 30/44 Front Axle 8-Lug Locking Hub Conversion Kit w/ Vented Big Rotors

SKU3034411

JK: Dana 30/44 フロント アクスル 8-ラグ ロック ハブ コンバージョン キット w/ ベント ビッグ ローター

(SKU3034411)
在庫状態 : アメリカからお取り寄せ
¥469,000(税別)
(税込:¥515,900)
数量:


英文説明(米国サイトの商品説明):

Upgrade your Dana 30 or Dana 44 front axle with one of these TeraFlex JK: Dana 30/44 Front Axle 8-Lug Locking Hub Conversion Kits. Increasing the distance between the inner and outer wheel bearings dramatically reduces bearing load.


DETAILS:

Upgrade your Dana 30 or Dana 44 front axle with one of these TeraFlex JK: Dana 30/44 Front Axle 8-Lug Locking Hub Conversion Kits.
Increasing the distance between the inner and outer wheel bearings dramatically reduces bearing load. The bearings ride on a forged 4140 chromoly spindle that uses readily available bearings and seals. The 8x6.5" wheel bolt pattern significantly increases wheel-to-flange strength and durability over a 5-lug bolt pattern.
The SlimLock Hub Kit features forged 4340 chromoly 35-spline stub shafts. Its high-surface area engagement makes them extremely durable. High-speed front driveline failures are eliminated by disengaging the hubs for highway use or flat towing.
The proprietary TeraFlex hub design seals the OEM wheel speed sensors from mud rocks and other trail hazards ensuring constant data transmission to maintain all ABS and ESP functions.


FITMENT INFO:

• JK Wrangler (2-door)
• JK Wrangler Unlimited (4-door)


INSTALL TIME:

4 hours install time


PRODUCT NOTES:

• On 2007-2011 JK Wrangler/Unlimited models, we recommend upgrading the stock master cylinder to our Brake Master Cylinder Kit w/ Oversized Bore (# 4303450).
• All 2013-2018 JK Wrangler/Unlimited Dana 30 and Dana 44 axles use the same 1350 series U-joint 5-7166X.
• We recommend replacing the inner seal when removing an axle shaft. As it makes sense to change both sides and both seals at the same time, the total install time will equal 4.9 hours. This install time includes both the driver and passenger side axle shafts, (2) inner seals, removal of differential, adding oil, and axle reassembly.
• 2007-2012 JK Wrangler/Unlimited Dana 30 axles require new inner shafts w/ larger U-joint end forgings.
• Locking Hub Kits and Full-Float Kits may not work w/ all wheels. Please verify fitment before installation.


お手数ですがブラウザー等の翻訳機能を利用して、
上記の英語の説明をご覧ください。
注)ただし、翻訳機能が正しく翻訳されると限らないので、
その点、ご了承のほどよろしくお願い致します。

パソコンのChromeブラウザーの場合ですと、
右クリックメニューから、"日本語に翻訳"を
クリックして頂くと日本語に翻訳されます。


製品ノート(PRODUCT NOTES):
(英文説明より抜粋)
• On 2007-2011 JK Wrangler/Unlimited models, we recommend upgrading the stock master cylinder to our Brake Master Cylinder Kit w/ Oversized Bore (# 4303450).
• All 2013-2018 JK Wrangler/Unlimited Dana 30 and Dana 44 axles use the same 1350 series U-joint 5-7166X.
• We recommend replacing the inner seal when removing an axle shaft. As it makes sense to change both sides and both seals at the same time, the total install time will equal 4.9 hours. This install time includes both the driver and passenger side axle shafts, (2) inner seals, removal of differential, adding oil, and axle reassembly.
• 2007-2012 JK Wrangler/Unlimited Dana 30 axles require new inner shafts w/ larger U-joint end forgings.
• Locking Hub Kits and Full-Float Kits may not work w/ all wheels. Please verify fitment before installation.



取付作業時間(INSTALL TIME):
(英文説明より抜粋)
約 4 時間
重量:
約 60 kg
適合車種等(FITMENT INFO):
(英文説明より抜粋)
• JK Wrangler (2-door)
• JK Wrangler Unlimited (4-door)
ビデオ:
送料について:
この商品の送料区分は、[-L-]となります。
(送料区分[-L-]は、50kg超です。)
詳しくは、送料一覧をご覧ください。

実際に送料を確認する場合は、商品をカートに入れて、
お客様情報、支払い方法を入力して頂くと、
"内容確認"画面にて、送料を確認することが出来ます。
"上記の内容で注文する"ボタンをクリックするまでは、
注文は確定されませんので、ご利用下さい。
お届け時期:

入金確認後、 アメリカのTeraFlex, Inc.

商品の注文を行います。

2週間から3週間ほどで、

本サイト運営店に商品が納品されます。

※現在、新型コロナや世界情勢に伴う
長期的な円安と物価高騰(空輸費の高騰)等の
影響を受けアメリカからの納品が大変遅れております。
目安として3ヶ月以上みて頂ければ幸いです。

納入後、直ちに商品を発送いたします。

(情勢により遅れる場合があります。)

当社に在庫がある場合、

入金確認後、1週間ほどで発送いたします。