JK: Dana 30/44 HD ボール ジョイント キット w/ ローレット – アッパー & ロー – セット の 4
JK: Dana 30/44 HD Ball Joint Kit w/ Knurl – Upper & Lower – Set of 4

SKU3442022

JK: Dana 30/44 HD ボール ジョイント キット w/ ローレット – アッパー & ロー – セット の 4

(SKU3442022)
¥54,000(税別)
(消費税:¥5,400)
数量:


英文説明(米国サイトの商品説明):

TeraFlex JK/JKU Heavy-Duty Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels.
FITS:

• JK Wrangler (2-door) w/ Dana 30 or 44 axle
• JKU Wrangler Unlimited (4-door) w/ Dana 30 or 44 axle

INCLUDES:

• Upper ball joints w/ knurl - pair
• Lower ball joints w/ knurl - pair

UPPER BALL JOINT FEATURES

• Extremely hard sintered wear bushings to handle extreme side load demands w/out failure
• Magnesium Phosphate coating to inhibit corrosion throughout
• Heat treated 4140 chromoly ball/stud & 1045 carbon steel housing
• Factory-style serrated flange nut & grease fitting

LOWER BALL JOINT FEATURES

• Hard alloy tool steel slotted wear plate for ball/stud to socket wear protection
• Wear plate features grease channels for increased flow through entire joint ensuring longevity & predictable operation
• Magnesium Phosphate coating to inhibit corrosion & friction throughout
• Heat treated 4140 chromoly ball/stud
• Huge 30mm (1.18”) ball
• Factory style serrated flanged castle nut
• Ball joint pre-load adjustability provides the end user w/ near effortless wear adjustment (kit includes Preload Adjustment Tool)
• Low-profile single lip dust seal eliminates torn conventional dust boot concerns
• Adjustable ball stud retaining ring for accurate initial & future preload adjustments that can be done w/out any axle disassembly
• Adjustable preload can be performed w/ simple hand tools
• Adjustable end cap w/ two zerk fittings allow greasing access from either side w/out axle shaft removal even w/ larger RCV shafts
• Dual helical grease grooves machined in the retaining ring allow spent grease to exit through the low-profile seal
• Low-profile seal prevents contaminants, while allowing spent grease to evacuate from the ball joint

NOTE:

• We recommend Ball Joints w/out Knurls (# 3442002 or # 3440000) as they will not score the inner knuckle & open up the bore.

• We also offer Ball Joint w/ Knurls (# 3442022 or # 3440020) for ball joints that have a loose press fit in the inner knuckle due to repeated ball joint replacement or if knurled ball joints have been installed in the past.

INSTALL TIME: 4 Hours

お手数ですがブラウザー等の翻訳機能を利用して、
上記の英語の説明をご覧ください。
注)ただし、翻訳機能が正しく翻訳されると限らないので、
その点、ご了承のほどよろしくお願い致します。

パソコンのChromeブラウザーの場合ですと、
右クリックメニューから、"日本語に翻訳"を
クリックして頂くと日本語に翻訳されます。


この商品には、以下の商品が含まれます。:
(英文説明より抜粋)

• Upper ball joints w/ knurl - pair

• Lower ball joints w/ knurl - pair

UPPER BALL JOINT FEATURES

• Extremely hard sintered wear bushings to handle extreme side load demands w/out failure

• Magnesium Phosphate coating to inhibit corrosion throughout

• Heat treated 4140 chromoly ball/stud & 1045 carbon steel housing

• Factory-style serrated flange nut & grease fitting

LOWER BALL JOINT FEATURES

• Hard alloy tool steel slotted wear plate for ball/stud to socket wear protection

• Wear plate features grease channels for increased flow through entire joint ensuring longevity & predictable operation

• Magnesium Phosphate coating to inhibit corrosion & friction throughout

• Heat treated 4140 chromoly ball/stud

• Huge 30mm (1.18”) ball

• Factory style serrated flanged castle nut

• Ball joint pre-load adjustability provides the end user w/ near effortless wear adjustment (kit includes Preload Adjustment Tool)

• Low-profile single lip dust seal eliminates torn conventional dust boot concerns

• Adjustable ball stud retaining ring for accurate initial & future preload adjustments that can be done w/out any axle disassembly

• Adjustable preload can be performed w/ simple hand tools

• Adjustable end cap w/ two zerk fittings allow greasing access from either side w/out axle shaft removal even w/ larger RCV shafts

• Dual helical grease grooves machined in the retaining ring allow spent grease to exit through the low-profile seal

• Low-profile seal prevents contaminants, while allowing spent grease to evacuate from the ball joint



取付作業時間:
(英文説明より抜粋)
約 4 時間

重量:
約 3 kg
車種:
JKU Wrangler Unlimited
JK Wrangler
送料について:
この商品の送料区分は、[-B-]となります。
(送料区分[-B-]は、サイズ:80cm以下、重量:5kg以下です。)
詳しくは、送料一覧をご覧ください。

実際に送料を確認する場合は、商品をカートに入れて、
お客様情報、支払い方法を入力して頂くと、
"内容確認"画面にて、送料を確認することが出来ます。
"上記の内容で注文する"ボタンをクリックするまでは、
注文は確定されませんので、ご利用下さい。
お届け時期:

入金確認後、 アメリカのTeraFlex, Inc.に商品の納品依頼を行います。

2週間から3週間ほどで、本サイト運営店に商品が納品されます。

納入後、直ちに商品を発送いたします。

(情勢により遅れる場合があります。)