JK: Dana 30/44 ハイ ステア ナックル キット (ナックルズ オンリー)
JK: Dana 30/44 High Steer Knuckle Kit (Knuckles Only)

SKU4390870

JK: Dana 30/44 ハイ ステア ナックル キット (ナックルズ オンリー)

(SKU4390870)
在庫状態 : アメリカからお取り寄せ
¥124,000(税別)
(税込:¥136,400)
数量:


英文説明(米国サイトの商品説明):

The TeraFlex JK: Dana 30/44 High Steer Knuckle Kit addresses several weaknesses prevalent in the stock axle steering configuration on JK Wrangler/Unlimited models with 4-6” lift kits.

These High Steer Knuckles maintain correct steering geometry angles for superior highway drivability. Tie Rod ground clearance is increased by more than 1-1/8” to prevent tie rod damage and bending. Cast from heavy-duty ductile iron and reinforced in areas prone to stress and deflection.

Compatible with all factory and aftermarket axle shafts, ball joints, wheel hubs, and tie rods. Does not affect operation of factory stability and traction control systems including ESP and ABS.

FEATURES/BENEFITS

• Installation does not require any cutting or removal of factory bracketry
• Cast from HD ductile iron
• Reinforces key section areas prone to stress and deflection
• Maintains correct steering geometry angles for superior highway drivability
• Provides HD solution for several weak vulnerabilities found in stock JK axle steering configuration
• Increases tie rod ground clearance by more than 1-1/8” to reduce tie rod impact

INCLUDES

• High Steer Knuckle – Left
• High Steer Knuckle – Right

VEHICLE FITMENT INFO

• JK Wrangler (2-door)
• JK Wrangler Unlimited (4-door)

• 4-6” Lift

PRODUCT NOTES

• NOT compatible w/ Falcon Nexus EF Steering Stabilizers when used w/ factory-style track bar bracket and/or factory-style axle housing.
• REQUIRES aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1055000) for stock wheels.
• REQUIRES additional modifications/components to flip the Drag Link over the axle to correct track bar angle, optimize steering geometry, and improve handling.
• MUST be used w/ an HD Drag Link Flip Kit (w/out Tie Rod: # 1853930; w/ Tie Rod: # 1853905). The HD Drag Link Flip Kit is also INCLUDED in our High Steer Systems (w/ Tie Rod: # 4391000; w/out Tie Rod: # 4390975) and HD Drag Link Flit Kit w/ Front Track Bar Drop Brackets & Frame Brace Kit (# 1600450).
• Other REQUIRED components include Front Track Bar Drop Bracket & Frame Brace Kit (# 1600444) or Front Track Bar Drop Bracket Kit – Frame End (# 1953000), HD Tie Rod (# 1853910), and Steering Stabilizer Relocation Mounting Bracket (# 1123160).

RELATED ITEMS

High Steer Systems:

• Dana 30/44 High Steer System w/ HD Drag Link Flip Kit & HD Tie Rod Kit (# 4391000)
• Dana 30/44 High Steer System w/ HD Drag Link Flip Kit – No HD Tie Rod Kit (# 4390975)

Separate Components:

• High Steer Knuckle Kit (# 4390870)
• HD Drag Link Flip Kit w/ Front Track Bar Drop Bracket & Frame Brace Kit (# 1600450)
• Front Track Bar Drop Bracket & Frame Brace Kit (# 1600444)
• Front Track Bar Drop Bracket Kit – Frame End (# 1953000)

• HD Forged Drag Link Flip Kit & HD Chromoly Tie Rod Kit (4-6” Lift) (# 1853905)
• HD Forged Drag Link Flip Kit (“flipped” w/ pressed-in joints (# 1853930)
• HD Forged Drag Link Kit & HD Chromoly Tie Rod Kit (0-3” Lift) (# 1853900)
• HD Forged Drag Link Kit (0-3” Lift) (# 1853920)
• HD Chromoly Tie Rod Kit (# 1853910)

• Steering Stabilizer Relocation Mount Bracket Kit – HD Tie Rod (# 1123160)

INSTALL TIME

3 Hours

お手数ですがブラウザー等の翻訳機能を利用して、
上記の英語の説明をご覧ください。
注)ただし、翻訳機能が正しく翻訳されると限らないので、
その点、ご了承のほどよろしくお願い致します。

パソコンのChromeブラウザーの場合ですと、
右クリックメニューから、"日本語に翻訳"を
クリックして頂くと日本語に翻訳されます。


この商品には、以下の商品が含まれます。:
(英文説明より抜粋)

• High Steer Knuckle – Left

• High Steer Knuckle – Right

VEHICLE FITMENT INFO

• JK Wrangler (2-door)

• JK Wrangler Unlimited (4-door)

• 4-6” Lift

PRODUCT NOTES

• NOT compatible w/ Falcon Nexus EF Steering Stabilizers when used w/ factory-style track bar bracket and/or factory-style axle housing.

• REQUIRES aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1055000) for stock wheels.

• REQUIRES additional modifications/components to flip the Drag Link over the axle to correct track bar angle, optimize steering geometry, and improve handling.

• MUST be used w/ an HD Drag Link Flip Kit (w/out Tie Rod: # 1853930; w/ Tie Rod: # 1853905). The HD Drag Link Flip Kit is also INCLUDED in our High Steer Systems (w/ Tie Rod: # 4391000; w/out Tie Rod: # 4390975) and HD Drag Link Flit Kit w/ Front Track Bar Drop Brackets & Frame Brace Kit (# 1600450).

• Other REQUIRED components include Front Track Bar Drop Bracket & Frame Brace Kit (# 1600444) or Front Track Bar Drop Bracket Kit – Frame End (# 1953000), HD Tie Rod (# 1853910), and Steering Stabilizer Relocation Mounting Bracket (# 1123160).

RELATED ITEMS

High Steer Systems:

• Dana 30/44 High Steer System w/ HD Drag Link Flip Kit & HD Tie Rod Kit (# 4391000)

• Dana 30/44 High Steer System w/ HD Drag Link Flip Kit – No HD Tie Rod Kit (# 4390975)

Separate Components:

• High Steer Knuckle Kit (# 4390870)

• HD Drag Link Flip Kit w/ Front Track Bar Drop Bracket & Frame Brace Kit (# 1600450)

• Front Track Bar Drop Bracket & Frame Brace Kit (# 1600444)

• Front Track Bar Drop Bracket Kit – Frame End (# 1953000)

• HD Forged Drag Link Flip Kit & HD Chromoly Tie Rod Kit (4-6” Lift) (# 1853905)

• HD Forged Drag Link Flip Kit (“flipped” w/ pressed-in joints (# 1853930)

• HD Forged Drag Link Kit & HD Chromoly Tie Rod Kit (0-3” Lift) (# 1853900)

• HD Forged Drag Link Kit (0-3” Lift) (# 1853920)

• HD Chromoly Tie Rod Kit (# 1853910)

• Steering Stabilizer Relocation Mount Bracket Kit – HD Tie Rod (# 1123160)

INSTALL TIME

3 Hours



取付作業時間:
(英文説明より抜粋)

3 時間

重量:
約 16 kg
車種:
JKU Wrangler Unlimited
JK Wrangler
送料について:
この商品の送料区分は、[-D-]となります。
(送料区分[-D-]は、サイズ:140cm以下、重量:20kg以下です。)
詳しくは、送料一覧をご覧ください。

実際に送料を確認する場合は、商品をカートに入れて、
お客様情報、支払い方法を入力して頂くと、
"内容確認"画面にて、送料を確認することが出来ます。
"上記の内容で注文する"ボタンをクリックするまでは、
注文は確定されませんので、ご利用下さい。
お届け時期:

入金確認後、 アメリカのTeraFlex, Inc.

商品の納品依頼を行います。

2週間から3週間ほどで、

本サイト運営店に商品が納品されます。

納入後、直ちに商品を発送いたします。

(情勢により遅れる場合があります。)

※現在、新型コロナの影響を受け
アメリカからの納品が大変遅れております。
目安として3ヶ月以上みて頂ければ幸いです。

当社に在庫がある場合、

入金確認後、1週間ほどで発送いたします。